PDA

View Full Version : Lower Tie Bars


Nick Leone
06-24-2007, 07:55 PM
Are lower tie bars legal in SP classes if they did not come with the car?

curtis
06-24-2007, 10:01 PM
From the rulebook. Page 85.

15.2 BODYWORK
Vehicles may only exceed the allowances of 13.2 as specified herein.
C. Strut bars are permitted with all types of suspension. Strut bars
may be mounted only transversely across the car from upper right
to upper left suspension mounting point and from lower right to
lower left suspension mounting point. No other configuration is
permitted. Only bolt-on attachment is permitted. Additional holes
may be drilled for mounting bolts. Interior trim panels may be
modified to allow installation of strut bars. Holes or slots may be
no larger than necessary and may serve no other purpose. This
does not permit any modifications to the frame or unibody beyond
the allowed mounting holes.

Nick Leone
06-24-2007, 11:26 PM
From the rulebook. Page 85.

15.2 BODYWORK
Vehicles may only exceed the allowances of 13.2 as specified herein.
C. Strut bars are permitted with all types of suspension. Strut bars
may be mounted only transversely across the car from upper right
to upper left suspension mounting point and from lower right to
lower left suspension mounting point. No other configuration is
permitted. Only bolt-on attachment is permitted. Additional holes
may be drilled for mounting bolts. Interior trim panels may be
modified to allow installation of strut bars. Holes or slots may be
no larger than necessary and may serve no other purpose. This
does not permit any modifications to the frame or unibody beyond
the allowed mounting holes.

Thank you curtis I must be blind or something but helps a lot in the not very expensive department